Please note dates and availability are subject to change.

 


Respiratory Protection Training and Qualitative Fit Tests
Wednesday, July 25, 2018, 9:00am – 11:00am
Contact Pauline at 804-355-7255 or email at pauline@circlesafety.com to register and pay.

“If you use a respirator at work, you must be trained at least every 12 months. This annual retraining will refresh your memory on the information and skills you need to use a respirator correctly. It gives you a chance to practice with a respirator and to ask questions and discuss worksite-specific respirator use with your instructor.” – Occupational Safety and Health Administration

Course Content:

  • Selection of Respirators
  • Reasons for Their Use
  • Limitations & Capabilities of the Devices
  • How to Use Respirators Effectively
  • How to Inspect & Maintain
  • How to Clean & Store
  • Physical Limitations and Respirator Use
  • Fit Testing Principles

Note: OSHA approved medical clearance must be provided for all participants receiving respirator fit tests. Go to this website for an online option for medical clearance: https://www.3m.com/3M/en_US/safety-centers-of-expertise-us/respiratory-protection/respirator-medical-evaluations/

When: Wednesday, July 25, 2018, 9:00am – 11:00am
Where: 6606 West Broad St., (Southern States Headquarters Building) First Floor Training Room
Cost: $100.00 per student (payable in advance)


EM385 Fall Protection Annual Refresher Training
Wednesday July 25, 2018, 1:00pm – 3:00pm
Contact Pauline at 804-355-7255 or email at pauline@circlesafety.com to register and pay.

For USACE-owned/operated permanent facilities, the refresher training requirement for the CPs is to stay current in fall protection and rescue knowledge by participating in at least two (2) hours annually of fall protection and rescue-related training and/or informational meetings.

  • Overview of Fall Prevention and Fall Protection
  • Need for Fall Protection
  • Fall Clearance Calculations
  • Personal Fall Arrest Equipment Inspections
  • Rescue Planning
  • Roles of Workers
  • Comprehension Test

When: Wednesday, July 25, 2018, 1:00pm – 3:00 p.m.
Where: 6606 West Broad St., (Southern States Headquarters Building) First Floor Training Room
Cost: $100.00 per student (payable in advance)


MSHA Part 46 New Miner Class, Open Enrollment For New Miners
Friday, August 17th, 2018 8:00am – 4:30pm
Contact Pauline at 804-355-7255 or email at pauline@circlesafety.com to register and pay.

Contractors working at surface mine sites are considered miners, and as such, must comply with the safety and health regulations of both the Federal Mine Safety and Health Administration (MSHA) and, in Virginia, the Virginia Department of Mines, Minerals and Energy, Division of Mineral Mines (DMM).

New miners are required to complete an 8 hour training course in order to secure their Virginia DMM GMM card.

Circle Safety & Health Consultants provide the necessary training and Virginia DMM GMM cards upon successful completion of the course.

When: Friday, August 17, 2018, 8:00am – 4:30pm
Where: 6606 West Broad St., (Southern States Headquarters Building) First Floor Training Room


First Aid / CPR & AED

Contact Pauline at 804-355-7255 or email at pauline@circlesafety.com to register and pay.

July 13, 2018, 8:00am – 3:00pm

August 17, 2018, 8:00am – 3:00pm

September 14, 8:00am – 3:00pm

Where: 6606 West Broad St., (Southern States Headquarters Building) First Floor Training Room


OSHA 10 Construction | Get more information on classes and schedules. Course details

OSHA 30 Construction | Get more information on classes and schedules. Course details

OSHA 10 General Industry | Get more information on classes and schedules. Course details

OSHA 30 General Industry | Get more information on classes and schedules. Course details


Silica Competent Person Training

The 3 hour class will include health hazards of silica, requirements of the OSHA standards, how to write or review a Silica Exposure Control Plan, strategies for compliance with the standard and more.

Call Bob Thompson at 804-355-7255 or email at bob@circlesafety.com to schedule a class for your organization.


Circle Safety & Health Consultants teaches OSHA Outreach classes according to the requirements of the OSHA Training Institute.

OSHA does not allow us to count break time as teaching time. An OSHA 10-hour class must therefore be scheduled across approximately 12 hours to allow time for hourly breaks and possibly meals.

OSHA does not allow us to teach an OSHA 10 in one day, so our OSHA 10 classes are conducted over a 1-1/2 day period.

New OSHA requirements state you must present a valid photo ID when reporting to class.

Have a need for a class not listed below?  Just let us know. Contact us or call 804-355-7255.

Please contact us with any questions or for registration information.

osha and workplace safety classes

Now Offering Deal With It!® Safety Culture Consultancy & Training LEARN MORE